Use the golf balls provided! The simulator picks up the design of the golf ball to track shot information and shot tracer.
DO NOT USE GOLF BALLS THAT HAVE SHARPIE MARKS ON THEM. The marker can transfer and stain the simulator screen.
DO NOT USE REGULAR GOLF TEES. They can puncture the screen.
Step 1: Turn on overhead projector using white remove in the hitting bay.
Step 2: Turn on the simulator by flipping the red switch on the black simulator connected to the ceiling. It is recommended to use either a golf club head or step ladder to reach the red switch. Once it is turned on, it will light up.
Step 3: Log into the computer with the password 515515
Step 4: Launch ‘Uneekor Launcher’ from the desktop (Yellow Icon) (Picture for reference)
Step 5: When the window pops up asking ‘Do you want this app to make changes to your device?’ select ‘yes’. The app will not open if you select no. If you accidentally click no, repeat step 4 and ensure to select ‘yes’ when the question window pops up again.
Step 6: When the Uneekor app opens, scroll down to where you can choose between the various softwares. You need to scroll down roughly 25% of the way until your screen looks like this. (Picture for reference)
You have now successfully opened the first software. Refer to the each simulators instructions below to load the GSPRO!
Step 1: Under ‘Third-Party Connector’ click the yellow start button. (Picture for reference)
Step 2: Minimize ‘Uneekor’ to display the new GSPRO Configuration Window. Now click ‘Play!’ (Picture for reference)
Step 3: A third window will now appear with shot statistics. In order for the ‘Ready’ in the bottom right corner to change from red to green, place a golf ball in the hitting zone (rectangle) on the turf. Once it lights up green, minimize the window. (Picture for reference)
Step 4: You are now ready to play! (Picture for reference)
- Play a round of golf: Select ‘Local Match’
- To set specifics for your round of golf, click ‘match settings’ once you open the round.
- Practice on the driving range: Select ‘Practice’
- Skills Challenges: Select ‘Challenges’
- Challenges include: full bag challenge, wedge challenge, Operation 36, and custom challenges
Step 1: Under ‘Third-Party Connector’ click the yellow start button. (Picture for reference)
Step 2: Minimize ‘Uneekor’ to now view the computer desktop page.
Step 3: Select ‘GSPRO Launcher’ at the top of the desktop. (Picture for reference)
Step 4: ‘GSPRO Launcher’ will now begin to load. Do not close out of it. This window will open and close automatically! (Picture for reference)
Step 5: A third window will now appear with shot statistics. In order for the ‘Ready’ in the bottom right corner to change from red to green, place a golf ball in the hitting zone (rectangle) on the turf. Once it lights up green, minimize the window. (Picture for reference)
Step 4: You are now ready to play! (Picture for reference)
- Play a round of golf: Select ‘Local Match’
- To set specifics for your round of golf, click ‘match settings’ once you open the round
- Practice on the driving range: Select ‘Practice’
- Skills Challenges: Select ‘Challenges’
- Challenges include: full bag challenge, wedge challenge, Operation 36, and custom challenges
Step 1: Close out of the ‘GSPRO’ software.
Step 2: Close out of open ‘Uneekor’ windows either remaining on the screen or on the bottom of the desktop page.
Step 3: Turn off simulator by flipping the red switch on the the black simulator connected to the ceiling.
Step 4: Turn off the overhead projector using the white remote in the hitting bay.