Use the golf balls provided! The simulator picks up the design of the golf ball to track shot information and shot tracer.
DO NOT USE GOLF BALLS THAT HAVE SHARPIE MARKS ON THEM. The marker can transfer and stain the simulator screen.
DO NOT USE REGULAR GOLF TEES. They can puncture the screen.
Step 1: Turn on overhead projector using white remove in the hitting bay.
Step 2: Turn on the simulator by flipping the red switch on the black simulator connected to the ceiling. It is recommended to use either a golf club head or step ladder to reach the red switch. Once it is turned on, it will light up.
Step 3: Log into the computer with the password 515515
Step 4: Launch ‘Uneekor Launcher’ from the desktop (Yellow Icon) (Picture for reference)
Step 5: When the window pops up asking ‘Do you want this app to make changes to your device?’ select ‘yes’. The app will not open if you select no. If you accidentally click no, repeat step 4 and ensure to select ‘yes’ when the question window pops up again.
Step 6: When the Uneekor app opens, scroll down to where you can choose between the various softwares. You need to scroll down roughly 25% of the way until your screen looks like this. (Picture for reference)
You have now successfully opened the software and can choose between View (driving range only) or The Golf Club 2019 (play courses or hit on the driving range).
Step 1: Click the yellow ‘Start’ button (Picture for reference)
Step 2: Minimize the ‘Uneekor Launcher’ App
Step 3: Select any of the ‘Select User’ profiles, such as ‘Jason Davis’ then click ‘Start’ in the lower right hand corner. (Picture for reference)
Step 4: The first screen to pop up will have you fill out your club and ball information. Make sure to select ‘Iron’ for the club and ‘Premium’ for the ball. Once these specs are entered, click ‘Add’ in the lower right hand corner. (Picture for reference)
You know the simulator is connected and ready for you to hit when the ‘Ready’ button in the top right corner is glowing red. (Picture for reference) If it is not glowing red, check to make sure 1. You have a ball within the recognized ‘hitting’ zone on the turf and 2. Make sure you follow step 2 from Section I.
To change between iron and driver, in the top left corner select ‘Add Session’. The same window from before will pop up and you can change the club you are using. Make sure to always select ‘Premium’ for the golf ball! (Picture for reference)
If you notice the system is delayed in showing your shot, you may want to clear out the range history. To do this, on the left hand side of the screen, click the box next to each session. Once they are selected, click ‘delete’ in the lower left hand corner. (Picture for reference) If you delete out a full session, the window will appear for you to enter in the club and ball data once again. All you need to do is repeat step four and you will be all set.
Step 1: Click ‘Exit’ in the upper right hand corner
Step 2: You have now returned to the home screen from Section II, Step 3. Click the ‘X’ again in the upper right hand corner.
Step 3: Make sure to close out any remaining Uneekor software that was running in the background.
Step 4: Turn off simulator switch to ‘Off’ on the ceiling. The light in the switch will also shut off.
Step 5: Turn off the overhead projector using the white remote in your bay (red off switch).
Step 1: Under ‘Third-Party Connector’ you will see ‘Third-party software’ then ‘The Golf Club 2019’. If you do not see ‘The Golf Club 2019’, click the drop down menu and select ‘The Golf Club 2019’. From there, click the yellow ‘Start’ button. (Picture for reference)
Step 2: A secondary window will appear behind your already open Uneekkor Launcher window. Once the second window appears, navigate to the desktop and open ‘TGC Simulator’ the green and blue icon under ‘Uneekor Launcher’ (Picture for reference)
Step 3: A third window will now appear, click ‘Start Game’. (Picture for reference)
Step 4: Select ‘Start The Golf Club Simulator 2019’ (Picture for reference)
Step 5: ‘The Golf Club 2019’ will begin launching
Step 6: Click ‘enter’ when ‘The Golf Club 2019’ main screen appears. There will be a small reminder in the bottom right corner to click enter
Step 1: Click ‘Exit’ from the main screen menu
Step 2: Click ‘Confirm’
Step 3: Make sure to close out any remaining Uneekor software that was running in the background.
Step 4: Turn off simulator switch to ‘Off’ on the ceiling. The light in the switch will also shut off.
Step 5: Turn off the overhead projector using the white remote in your bay (red off switch).